Assemblies for industries that can’t afford failure.
Fibril-free Fluorflow PTFE hose assemblies, engineered and assembled with full process control by Fluorhose.
- Assemblies built exclusively with Fluortubing products.
- All Fluor Hose assemblies are designed and tested in accordance with EN16643:2016
Reliable Hose Performance Starts with Control
Hose reliability is not achieved by chance or inspection. It is the result of controlling every factor that influences performance before the assembly enters service.
Fluor Hose combines application-driven engineering, Fluorflow’s fibril-free PTFE hose technology and a fully validated in-house crimp program to deliver hose assemblies under complete material and process control. This provides single-source responsibility from specification through to final assembly.
Fluorflow eliminates PTFE failure mechanisms at the source
Unique production processes remove material-related risks before they affect your process.
- Performance by Design
- Fibril-free PTFE construction eliminates contamination risk and removes the need for post-processing or aggressive cleaning.
- 100% PTFE liner with increased wall thickness provides improved chemical resistance and eliminates failure risks associated with helical wire reinforcement.
- High flex performance tested to over 2,500,000 rolling U cycles for demanding dynamic applications.
- Up to 3× greater resistance to static discharge events tested to over 2,500,000 rolling U cycles in ultrapure applications where antistatic liners cannot be used.
- Independently tested to meet sector-specific validation requirements, including USP protocols (2026).
- Tested in accordance with EN16643:2016 Type SC hose standards, meeting or exceeding requirements for demanding chemical applications.
Fluorflow PTFE Hose Technology
Designed for consistent performance in critical process applications.
The Right Hose Is Engineered, Not Selected
Failures often originate from incorrect assumptions during hose selection. Movement, pressure, temperature, chemical compatibility and compliance requirements must be considered and engineered into the specification from the outset.
Fluor Hose applies application-driven engineering to ensure the correct Fluorflow hose and fittings are specified for each critical application. Eliminating failure risks before assembly even begins.
PARAMETER: PRESSURE
PARAMETER: BEND RADIUS
PARAMETER: MEDIA COMPAT.
ENGINEERING STATUS
RISK RESOLVED
Assembly as a Controlled and Validated Process
Even the best hose material will fail if the assembly process is not controlled. Fluor Hose operates a fully validated in-house crimp programme, where assembly is treated as a controlled manufacturing process rather than a manual operation.
- Validated crimp parameters for consistent assembly performance
- In-house engineered design for maximum performance and quality
- Full traceability and documented assembly records
Built on Validation. Proven in Operation.
Validation is not an afterthought at Fluor Hose. It is built into both material selection and the assembly process from the outset.
Designed and tested in accordance with EN16643:2016 Type SC hose standards.
Every assembly is pressure tested to verify performance and safety under operating conditions.
Assemblies are tested where required to ensure safe dissipation of static charge.
Complete batch traceability with EN 10204 3.1 material certification.
Where Process Failure Is Not an Option
Biopharmaceutical Manufacturing
Contamination and validation failures start at the material level. Fluorflow fibril-free PTFE hose assemblies eliminate these risks at the source.
Chemical Processing
Thin-walled PTFE and microcracking increase permeation and failure risk. Fluorflow eliminates both through fibril-free construction and increased wall thickness.
Food & Beverage
Fibre release and contamination can compromise product quality. Fluorflow assemblies provide clean, hygienic transfer without additional cleaning requirements.
Trusted in regulated and high-risk environments
Fluorhose is Fluortubing’s engineering and assembly partner for failure-critical PTFE hose assemblies. A single-source approach ensures full control over materials, assembly quality, validation, and long-term performance.
Built for applications where performance matters most
Engineered for applications where failure is not acceptable.
Fluorflow assemblies by Fluorhose are built to control contamination, protect uptime, and meet the highest regulatory standards.